Residual stress distributions in welded stainless steel sections

Residual stress magnitudes and distributions in structural stainless steel built-up sections have been comprehensively investigated in this study. A total of 18 test specimens were fabricated from hot-rolled stainless steel plates by means of shielded metal arc welding (SMAW). Two grades of stainless steel were considered, namely the austenitic grade EN 1.4301 and the duplex grade EN 1.4462. Using the sectioning method, the test specimens were divided into strips. The residual stresses were then computed by multiplying the strains relieved during sectioning by the measured Young׳s moduli determined from tensile and compressive coupon tests. Residual stress distributions were obtained for 10 I-sections, four square hollow sections (SHS) and four rectangular hollow sections (RHS). Peak tensile residual stresses reached around 80% and 60% of the material 0.2% proof stress for grades EN 1.4301 and EN 1.4462, respectively. Based upon the test data, simplified predictive models for residual stress distributions in stainless steel built-up I-sections and box sections were developed. Following comparisons with other available residual stress test data, the applicability of the proposed models was also extended to other stainless steel alloys. The proposed residual stress patterns are suitable for inclusion in future analytical models and numerical simulations of stainless steel built-up sections

Violet electroluminescence of AlInGaN-InGaN multiquantum-well light-emitting diodes: Quantum-confined stark effect and heating effect

Electroluminescence (EL) from AlInGaN-InGaN multiquantum-well violet light-emitting diodes is investigated as a function of forward bias. Two distinct regimes have been identified: 1) quantum-confined Stark effect at low and moderately high forward biases; 2) heating effect at high biases. In the different regimes, the low-temperature EL spectra exhibit different spectral features which are discussed in detail. © 2007 IEEE.published_or_final_versio

Research on the allocation efficiency and influencing factors of scientific and technological resources in the yangtze river delta city group

Through the establishment of a comprehensive evaluation index system, this paper analyzes the allocation of science and technology resources in the Yangtze River Delta urban agglomeration from 2014 to 2020, evaluates the allocation efficiency of science and technology resources from the perspective of multi input and output, and understands the advantages and disadvantages of regional resource allocation. The research results show that: (1) under the guidance of the national strategic policy of actively promoting the development of world-class urban agglomerations, the allocation efficiency of science and technology resources in various provinces and cities of the Yangtze River Delta continues to optimize, and the allocation level of some regions shows a rapid development trend; (2) R&amp;D personnel and R&amp;D funds are the core factors that affect the efficiency of science and technology resource allocation; (3) the marketization of resource allocation is helpful to improve its allocation efficiency; and (4) improving the transformation rate of scientific and technological achievements, opening up the channel for innovative products, technologies, and services to enter the market, and enabling innovative enterprises to make profits can provide strong and lasting incentives for the improvement of scientific and technological resource allocation efficiency. Based on the research conclusions, this paper puts forward countermeasures and suggestions to improve the allocation efficiency of scientific and technological resources in the Yangtze River Delta urban agglomeration from the aspects of human resources and material resources, and provides a theoretical reference for the coordinated and sustainable development of the Yangtze River Delta City Group under the background of the implementation of the urban agglomeration strategy and the construction of a scientific and technological infrastructure platform.</jats:p

Automatic extraction of Chinese terms

This paper presents a hybrid method of Chinese Term Extraction, combining statistical information with linguistic knowledge. In this paper, we propose the Local Reoccurrence Measure, which greatly improves the automatic term recognition, especially for new terms and other terms with low frequency. This measure can also be applied to term extraction of foreign language and other applications

Real-time counting of single electron tunneling through a T-shaped double quantum dot system

Real-time detection of single electron tunneling through a T-shaped double quantum dot is simulated, based on a Monte Carlo scheme. The double dot is embedded in a dissipative environment and the presence of electrons on the double dot is detected with a nearby quantum point contact. We demonstrate directly the bunching behavior in electron transport, which leads eventually to a super-Poissonian noise. Particularly, in the context of full counting statistics, we investigate the essential difference between the dephasing mechanisms induced by the quantum point contact detection and the coupling to the external phonon bath. A number of intriguing noise features associated with various transport mechanisms are revealed.Comment: 8 pages, 5 figure

Visualization of vortex motion in FeAs-based BaFe<inf>1.9</inf>Ni <inf>0.1</inf>As<inf>2</inf> single crystal by means of magneto-optical imaging

Superconductivity has been found in newly discovered iron-based compounds. This paper studies the motion of magnetic vortices in BaFe1.9Ni 0.1As2 single crystal by means of the magneto-optical imaging technique. A series of magneto-optical images reflecting magnetic flux distribution at the crystal surface were taken when the crystal was zero-field cooled to 10 K. The behavior of the vortices, including penetration into and expulsion from the single crystal with increasing and decreasing external fields, respectively, is discussed. The motion behavior is similar to that observed in high-Tc superconducting cuprates with strong vortex pinning; however, the flux-front is irregular due to randomly distributed defects in the crystal. © 2011 American Institute of Physics

Genome-Wide Studies of Histone Demethylation Catalysed by the Fission Yeast Homologues of Mammalian LSD1

In order to gain a more global view of the activity of histone demethylases, we report here genome-wide studies of the fission yeast SWIRM and polyamine oxidase (PAO) domain homologues of mammalian LSD1. Consistent with previous work we find that the two S. pombe proteins, which we name Swm1 and Swm2 (after SWIRM1 and SWIRM2), associate together in a complex. However, we find that this complex specifically demethylates lysine 9 in histone H3 (H3K9) and both up- and down-regulates expression of different groups of genes. Using chromatin-immunoprecipitation, to isolate fragments of chromatin containing either H3K4me2 or H3K9me2, and DNA microarray analysis (ChIP-chip), we have studied genome-wide changes in patterns of histone methylation, and their correlation with gene expression, upon deletion of the swm1+ gene. Using hyper-geometric probability comparisons we uncover genetic links between lysine-specific demethylases, the histone deacetylase Clr6, and the chromatin remodeller Hrp1. The data presented here demonstrate that in fission yeast the SWIRM/PAO domain proteins Swm1 and Swm2 are associated in complexes that can remove methyl groups from lysine 9 methylated histone H3. In vitro, we show that bacterially expressed Swm1 also possesses lysine 9 demethylase activity. In vivo, loss of Swm1 increases the global levels of both H3K9me2 and H3K4me2. A significant accumulation of H3K4me2 is observed at genes that are up-regulated in a swm1 deletion strain. In addition, H3K9me2 accumulates at some genes known to be direct Swm1/2 targets that are down-regulated in the swm1¿ strain. The in vivo data indicate that Swm1 acts in concert with the HDAC Clr6 and the chromatin remodeller Hrp1 to repress gene expression. In addition, our in vitro analyses suggest that the H3K9 demethylase activity requires an unidentified post-translational modification to allow it to act. Thus, our results highlight complex interactions between histone demethylase, deacetylase and chromatin remodelling activities in the regulation of gene expression

Polylysine-immobilized affinity nylon membrane used for bilirubin adsorption

Microporous polyamide membranes were activated by epibromohydrin and subsequently bound with hydroxyethylcellulose (HEC) to amplify reactive groups. Then polylysine (PLL) as ligand was also immobilized onto the nylon membranes by epibromohydrin activation. Such PLL-HEC affinity membranes are used to adsorb bilirubin from the phosphate buffer solutions. The adsorption mechanism of bilirubin and the effects of temperature and ionic strength on adsorption were investigated by batch experiments. These membranes were also set in stack and used to adsorb bilirubin. The results showed that the quicker adsorption equilibrium was attained and these membranes exhibited high binding affinity capacities for bilirubin

Abiotic factors influencing biomass accumulation of green tide causing Ulva spp. on Pyropia culture rafts in the Yellow Sea, China

Annually recurrent green-tides in the Yellow Sea have been shown to result from direct disposal into the sea of fouling Ulva from Pyropia aquaculture. The role abiotic factors play in Ulva biomass accumulation on rafts was studied to find ways to mitigate this problem. Dissolved inorganic nitrogen (DIN) was very high at all sites, but the highest Ulva biomass was associated with the lowest DIN and anthropogenic N. Under luxuriant background nutrient conditions, variability in temperature and periods of emersion, rather than pH, light and salinity determined Ulva biomass. Two dominant species of Ulva displayed differing tolerances to temperature and desiccation which helped explain why Ulva prolifera dominates floating green-tides. Rather than trying to mitigate green tides only by reducing nutrient pollution, an earlier harvest of Pyropia in southern Jiangsu Province especially before temperatures increase greatly above 10 degrees C during April, could reduce the biomass of U. prolifera disposed from rafts. Crown Copyright (C) 2016 Published by Elsevier Ltd. All rights reserved

Synthesis and Characterization of Tin Disulfide (SnS2) Nanowires

The ordered tin disulfide (SnS2) nanowire arrays were first fabricated by sulfurizing the Sn nanowires, which are embedded in the nanochannels of anodic aluminum oxide (AAO) template. SnS2nanowire arrays are highly ordered and highly dense. X-ray diffraction (XRD) and corresponding selected area electron diffraction (SAED) patterns demonstrate the SnS2nanowire is hexagonal polycrystalline. The study of UV/Visible/NIR absorption shows the SnS2nanowire is a wide-band semiconductor with three band gap energies (3.3, 4.4, and 5.8 eV)